Tank adapter question

[wolfmangreg]

Just bought a 30 minute MSA SCBA tank, & will be filling from my compressor- the fill whip on my compressor terminates with a female Foster fitting.
The tank valve, pictured here, is confirmed by MSA website to be CGA-347. I have a male CGA-347 to male Foster adapter, but need a female CGA-347 to male Foster.

So what I need is one of these:

https://airtanksplus.com/product/scba-hand-tight-to-paintball-fill-adapter-cga-347-to-male-foster/

Correct? Seems simple enough, just want to confirm with the AGN illuminati that I'm not missing anything.

 

[dizzums]

i use one of these .. actually i removed the hose and just screwed a male foster in it ..
CGA347 Paintball Fill Station Kit PCP SCBA Charging Refill Adapter w/ 60cm Hose | eBay https://www.ebay.com/itm/2842937585...s8eFs9O2D6c5SCVZ/DgXQXxth/dz|tkp:BFBMtvLm0cVg

 

[Gerry52]

I would suggest this one: https://www.ebay.com/itm/2552967602...PVzi0eLSdG&var=&widget_ver=artemis&media=COPY
It's got a hand tight nut to the CGA347 threads instead of a wrench tight nut. Just remove the hose from it and install a Male foster where the hose was. IF you install a one way foster you WON'T be able to fill your gun from the tank as the one way won't allow it. That why I, personally, have 2 CGA347 adapters. One with a one way foster dedicated ONLY for filling tanks and one with a fill whip for filling guns from the tank.

 

[blackdiesel]

It's easier and just as cost effective to change out the valve to fill assembly and valve combination. $59 from Amazon.

 

[blackdiesel]

$59 at Amazon
Non regulated 7/8-14UNF paintball fill station paintball pcp air gun charging valve dual gauge up to 4500psi with 20" high pressure hose https://a.co/d/fVA6NKz