Taipan Veteran - the 5 minute Huma regulator adjustment

[KMoses]

This makes changing regulator pressure quick and easy.....without taking the gun apart. see attached, drill dimples (I used a Dremel) in the regulator - paint in the dimples (I used the wife's fingernail polish) - drill the dimples to align with the pressure marks taped on the regulator body - and one on the adjust valve. Now, all ya need to do is drain the air from the chamber - unscrew/remove the air gauge from the end of the tube and insert a long screwdriver to adjust, (i adapted a screwdriver apex to fit my Dewey cleaning rod) might need some light to see... insert the screwdriver down the tube and twist to desired setting. using the dimple's to align to your desired pressure. It don't get any easier than this guys.

 

[Pea-shooter O.G.]

I did similar to my Huma I installed in my Marauder a while back. I put a dimple in the adjustment screw on the top and used a Sharpie to mark off the pressures on top so they were visible while looking down the air tube with the regulator still installed.

 

[jwrabbit123]

cool beans time saver for sure

 

[Vetmx]

You might want to put the word Huma in the title of this topic. When I first saw it I was thinking I gotta see this.