so got the taipan veteran was shooting low 800 its a 25 cal. right about 875 over 30 shots on the chrony and after 40 shots it climbed to mid 930 or so . never lost accuracy . So today got the Donny fl speed dialer and started to my task to dial it in. got the Donny fl speed dialer installed and went to work, shooting the25.39 jsb kings is what I'm shooting so turned it in till felt some decent pressure and fired few rounds was like 860 for 5 shots dialed it in little more and got 890 ish it was accurate but never felt like it was in tune, little more and it became electric I mean I'm no pro but all sudden it was really like shooting nothing and I guess its what Ted talks about the harmonics I felt it I could here it and it was just something iv never really felt in all the different pcp guns I owned ended up with a average of 914 and the gun is electric just pull the trigger and it there I did do some of the master Ernest Rowe trigger video and hes great. I bet its like 10oz but very predictable and like glass like my air wolf mct was but even better. just thought id share the great findings I did today and man its sure is nice to hear and feel the harmonics once I really felt it any way thanks for reading here is few shots from it thanks DONNY FL FOR THE GREAT STUFF 10 SHOT GROUP AT 60 YARDS 
The speed dialer is a must! I'm also shooting 25gr but mine came shooting them at around 930fps. For what you described the hammer spring tension was too low for the regulator pressure. This Taipans come really hot. I have mine shooting at around 905 fps but even at this speed the reg pressure seems too high for the adjustment on the hammer spring. But even like this I can get 40 shots regulated and then one more mag are still usable after falling regulator.
