Taipan Veteran & Mutant .22/.25 Cal Slug Loader .STL (FREE)

[anaranjo25]

UPDATE: Attached is another .stl for 3.0mm seat depth if you are using long slugs. Otherwise, use the 3.3mm version for everything else. 

View attachment Slug Loader Universal.stl 3.0.1638580139.stl



This is a small tool that seats all 10 slugs at a seat depth of 3.3mm into the magazine. This tool works great on dish and flat base slugs. It seats the slugs into the magazine, preventing the slugs from becoming loose during rotation in the gun and from falling out in general.

Print out of whatever you want. No supports required. I printed this design with PETG and TPU (95 durometer). Works awesome.

View attachment 3.3 Slug Loader.1636217179.stl

 

[Motorhead]

Now that is slick !!!

 

[camtuning]

Nice- thanks for posting. I want to try shooting slugs out of my Veteran soon. 

 

[anaranjo25]

I've had tremendous success with NSA 20.2 in .217 and at speeds greater than 870fps (dont go lower than this). They group consistently under MOA in my case. 

 

[camtuning]

I've had tremendous success with NSA 20.2 in .217 and at speeds greater than 870fps (dont go lower than this). They group consistently under MOA in my case.

I'll see if I can find some! 

 

[camtuning]

I printed one and ordered some slugs. Pic next to my 3D printed 22 mags.

 

[anaranjo25]

Looking good! How do the printed mags perform? 

 

[camtuning]

Looking good! How do the printed mags perform?

They've been great. It took me 6+ revisions to get them right but they cycle 100% of the time. I have printed a couple dozen of them. If you want to try some send me a PM with your address and I'll ship you a few.