Taipan Veteran Long accessory rail to use bipod

[CurlyWoods]

Wondering if any Taipan Veteran Long users have added a picatinny rail to your guns to allow for bipod attachment? Is the stock strong enough to mount this type of rail safely? 

 

[cwcarrera]

This is what I bought for the forend of my Veteran Standard. No problem with the stock being strong enough. I did have to use different screws then what came with the rails to attach to the forend of the stock, but that was a simple trip to the hardware store. I bought the 3 rail kit so I could choose what length I liked best... I used the 7 slot rail on my Std.

Chip

https://www.amazon.com/dp/B074TZKZVH?psc=1&ref=ppx_pop_dt_b_product_details

 

[CurlyWoods]

This is what I bought for the forend of my Veteran Standard. No problem with the stock being strong enough. I did have to use different screws then what came with the rails to attach to the forend of the stock, but that was a simple trip to the hardware store. I bought the 3 rail kit so I could choose what length I liked best... I used the 7 slot rail on my Std.

Chip

https://www.amazon.com/dp/B074TZKZVH?psc=1&ref=ppx_pop_dt_b_product_details

Thanks Chip. Much appreciated!

 

[elh0102]

There are lots of short pic rails you can use, and there is plenty of wood for a robust attachment. 

 

[Yo]

One of my Taipans MIGHT be shooting slower than average so I switched to a RED HUGGETT to hopefully make it shoot HOTTER... (And COPY MATT247365) who would probably tell me...