Tune 1: FX 34 Heavies/JSB MK2 Heavies 915FPS. One hole at 50.
Shot String: 250Bar Fill (300max)
Placeholder
Target: Placeholder
Gun Weight: 8.399 with Ergo Vertical Grip
Initial Impression:
The rifle is extremely solid. No sharp edges anywhere. The moderator is HUGE and also acts as a barrel tensioner. The trigger is the same as the OG Taipan (super adjustable). The cocking is ridiculously smooth and solid (very refined, buttery). The cocking throw is medium (compared to an M3 which is short). The machine work is flawless (the gun looks "melted"). The barrel needed a lot of patches before it was clean. Accuracy is absolutely mind blowing (tuned). Rifling is grooved. Balance is neutral in hand. Cocking lever can be swapped to the left from the right. The AR grip that it came with was rubber overmolded and solid feeling. The rifle requires AR grips that are "Flat topped". The pic rail can be removed from the bottom (option parts to come?). The trigger guard can be removed. Every part on this gun just feels super refined.
ToDo:
Replace all bolts with Titanium
Cocking Lever Bolts: M4x16
Cocking Mechanism Plate (Right): M4x8
Barrel Clamp Bolts:M4x18
Cheek Cap Bolts: M4x30 TP (Currently 318m SS)
Trigger Plate Bolts:M4x8 Counter Sunk (Currently 318m SS)
Trigger: Adjusted for a 2.8oz first stage, 4.8oz second stage. No creep. No overtravel.
Shot String: 250Bar Fill (300max)
Placeholder
Target: Placeholder
Gun Weight: 8.399 with Ergo Vertical Grip
Initial Impression:
The rifle is extremely solid. No sharp edges anywhere. The moderator is HUGE and also acts as a barrel tensioner. The trigger is the same as the OG Taipan (super adjustable). The cocking is ridiculously smooth and solid (very refined, buttery). The cocking throw is medium (compared to an M3 which is short). The machine work is flawless (the gun looks "melted"). The barrel needed a lot of patches before it was clean. Accuracy is absolutely mind blowing (tuned). Rifling is grooved. Balance is neutral in hand. Cocking lever can be swapped to the left from the right. The AR grip that it came with was rubber overmolded and solid feeling. The rifle requires AR grips that are "Flat topped". The pic rail can be removed from the bottom (option parts to come?). The trigger guard can be removed. Every part on this gun just feels super refined.
ToDo:
Replace all bolts with Titanium
Cocking Lever Bolts: M4x16
Cocking Mechanism Plate (Right): M4x8
Barrel Clamp Bolts:M4x18
Cheek Cap Bolts: M4x30 TP (Currently 318m SS)
Trigger Plate Bolts:M4x8 Counter Sunk (Currently 318m SS)
Trigger: Adjusted for a 2.8oz first stage, 4.8oz second stage. No creep. No overtravel.
Last edited: