Edited to reflect changes/update.
I think she is done, you can call her Margaret.
Front view of gun. New Wika gauge was installed, originally came with a defective Edmu from previous owner. I ended up swapping out the DonnyFL for the Weihrauch. It had some blemishes, so I wrapped it in black CF vinyl. It's very effective and looks pretty good too. It also clears the air tank by a tiny bit more. The Deadpool theme was actually a last minute revelation.
Was originally going to do the red design in real Red CF, but....I could not find what I wanted at the right price, that and frankly I lack the technical skills, tools, and time to do what I really wanted here. Crowned it with a UTG Bug-Buster, not the most quality scope, but fits it well and it's getting the job done.
Baby Got Back! Red Anodized Aluminum DonnyFL power adjuster knob compliments the Red theme really well. Four stainless steel screws and contact glue affixing the rubber butt pad. When I got it (used) it was falling off, apparently it was cheaply glued on from the factory and the seller did not disclose such things to me. I did manage to drill a little too high and touch the action on the inside (because I'm stupid) and kiss the back side of the action. No harm done in the end though.
Originally I used a slightly wider shroud with the flat end DonnyFL Koi/Tanto. I think the longer LDC with the cone end along with a thinner shroud looks a bit better.
Accuracy: JSB 18s x 3 @ 25 yards, pinky for reference.
I think she is done, you can call her Margaret.
Front view of gun. New Wika gauge was installed, originally came with a defective Edmu from previous owner. I ended up swapping out the DonnyFL for the Weihrauch. It had some blemishes, so I wrapped it in black CF vinyl. It's very effective and looks pretty good too. It also clears the air tank by a tiny bit more. The Deadpool theme was actually a last minute revelation.
Was originally going to do the red design in real Red CF, but....I could not find what I wanted at the right price, that and frankly I lack the technical skills, tools, and time to do what I really wanted here. Crowned it with a UTG Bug-Buster, not the most quality scope, but fits it well and it's getting the job done.
Baby Got Back! Red Anodized Aluminum DonnyFL power adjuster knob compliments the Red theme really well. Four stainless steel screws and contact glue affixing the rubber butt pad. When I got it (used) it was falling off, apparently it was cheaply glued on from the factory and the seller did not disclose such things to me. I did manage to drill a little too high and touch the action on the inside (because I'm stupid) and kiss the back side of the action. No harm done in the end though.
Originally I used a slightly wider shroud with the flat end DonnyFL Koi/Tanto. I think the longer LDC with the cone end along with a thinner shroud looks a bit better.
Accuracy: JSB 18s x 3 @ 25 yards, pinky for reference.