Tuning Taipan trigger help

[Erics]

Having issues with my trigger. It wont retract fully after release, and the safety wont engage. If i manually push it forward, the safety will work. 
if i loosen the rod holding screw (circled in red) it moves freely. But as soon as i tighten it, the trigger gets stuck about 1/8th” back. I usually have it seated all the way in before tightening, and have tried various positions. 

circled in yellow is fully extended. Adjusted 1st stage tension screw, no help.

 

[Odoyle]

https://www.airgunnation.com/topic/taipan-veteran-trigger-adjustment-picture/

https://youtu.be/3JgxLK7rjYc

 

[Erics]

Thanks, seen those. Not sure what is affecting the actual trigger area causing it to not fully retract.

 

[Odoyle]

Can you post a detailed video?

 

[Odoyle]

You can try setting it back to factory specs.

https://talonairgun.com/forums/topic/taipan-veteran-trigger-adjustment-picture/

 

[mtnGhost]

Reinstall your trigger housing. 

 

[Erics]

https://youtu.be/ZR5IyPB6glo

heres it getting stuck

 

[Erics]

Moving freely

https://youtu.be/mm1u81KHN9o

 

[Odoyle]

Looks like your trigger linkage is loose.

 

[Erics]

Thats showing it moves freely when disconnected

 

[Odoyle]

Then You got something binding rubbing somewhere. Something not aligned properly or pinching the trigger and linkage some place. Why did you need to adjust such a perfect straight out of the box trigger anyway?

 

[Erics]

SOLVED! Finally after tinkering with it all day, it was the linkage where it attaches to the trigger. It pulled out there so thats where the play was. I pressed it back in and all is good now.

Thanks for all the responses.

 

[Odoyle]

Glad it's ok now.