Taipan Standard screws specs

[tnx206]

Hi guys,
Got a small issue with my .22 Taipan purchased recently. The top 2 screws by the cocking level is showing a little sign of rust. Got the schematic from the manual but no specs list of the parts. Looking to replace all the screws with stainless. Any one know the specs of the screws? Or have the schematic parts list? Thanks.

 

[Thach2264]

Bring the screws to Home Depot, they have thread fitting there and stainless metric of all size.

 

[Motorhead]

4 x 0.7 threading on small screws
5 x 0.8 on larger screws

Standard metric threading you find in hardware stores etc .... EASY replacement !!!

 

[tnx206]

Like this one? Can you please tell me the length? Thanks

 

[Seth0764]

Just take 1 of each size you need out of your gun go to ace hardware and pick out your screws

 

[tnx206]

Thanks. Ace HW is the place. A little pricey ($2.39 for one) but their selections of stainless is amazing.

 

[igolfat8]

4-.7 x 30 are the two vertical screws on the cocking block. The barrel pinch bolt screws are 5-.8 x 10 and 5-.8 x 16.

 

[tnx206]

I’m going to get all the outer screws replaced eventually and thank you so much for putting your time and effort into finding what their specs are. I solute you sir.