Taipan Mutant .22 resin mag 3d printed

[Thach2264]

I didn't plan on taking this route, but after trying to buy it from someone at GTA, the seller refuse or don't want to sell it to me for some strange reason. So, I decided to make my own. Bought myself a 3d resin printer and some research and got it working after 6-7 try. The walls between the pellets are thin thin, but it's working and indexing as it should. Anyone want to try 3d resin printing them self, feels free to dl the attachment. This is for 3d RESIN printing, NOT 3d filament printing.

I use tinkercad to draw this, so it's free.

Here's the resin recipe so it wont be too fragile
10% Siraya Tech Tenacious 3D Printer Resin Flexible
90% Anycubic normal resin

I just started this 3d thing last month, so I do not know any more info regarding 3d resin printing.

enjoy

View attachment 309088

 

[wimpanzee]

Thanks! I just recently got an anycubic mono, and have had a taipan mutant for years! I'll try these out!

 

[wimpanzee]

I've got some Siraya Tech Tenacious 3D Printer Resin Flexible coming today. I got some obsidian black, and some green translucent anycubic resin to mix to it, so I am curious how they will turn out.

 

[Thach2264]

Let's us know how it come out. If you feel it still too brittle, add maybe 5-10% more of the Siraya. I upped mine to around 15% now.

 

[wimpanzee]

Unfortunately my first two tries cracked trying to pry them off the print plate. Going to try some different exposure settings - I had modified my them for some d&d minis...

 

[Thach2264]

I wash and rinse my first with isopropyl before trying to pry them out, just put them in any (food) container.

 

[wimpanzee]

I finally had some better luck!
1. added a little more tenacious resin
2. warmed the print plate before trying to remove
3. used a razor instead of a paint scraper - much more precise!
4. gently rinsed for 2 minutes, cured for 2 minutes

I just need to ream the chambers a tiny bit - they are tight on exit - but otherwise looking great!

 

[Thach2264]

Great!
Take extra time to ream those chambers, the walls are very thin and easy to cracks.