Are the specs outside of the barrel length and caliber of barrel and probe on a Taipan the same elsewhere? Mod baffles, length of pull, etc. thanks.
Taipan models
- Thread starter rangur1
- Start date
Long and Standard have the same stock, and therefore LOP.
Short has a shorter length of pull than the Long and Standard. This also means that the trigger rod is shorter on the Short than the Standard and Long.
Major differences between all three are exactly what a guy would expect: tube length, barrel length, and shroud length (can't remember if ive ever counted baffles but I do remember a heck of a big dead space in the rear of the Long's shroud, behind the c-clipped 1/2x20-threaded piece inside the shroud, and yes it's ventilated for air to get back into that dead space).
Other than that, all parts are swappable. (Probes, tube end caps, valves, magazines, breech blocks, regs, trigger components, scope tower etc).
Short has a shorter length of pull than the Long and Standard. This also means that the trigger rod is shorter on the Short than the Standard and Long.
Major differences between all three are exactly what a guy would expect: tube length, barrel length, and shroud length (can't remember if ive ever counted baffles but I do remember a heck of a big dead space in the rear of the Long's shroud, behind the c-clipped 1/2x20-threaded piece inside the shroud, and yes it's ventilated for air to get back into that dead space).
Other than that, all parts are swappable. (Probes, tube end caps, valves, magazines, breech blocks, regs, trigger components, scope tower etc).
Upvote 0