unionrdr ....
To say I'm a bit confused would be an understatement.
Please forgive me if I'm missing something here.
Standing by for your reply
To say I'm a bit confused would be an understatement.
- The valve you sent be is in superb condition.
- The screw you provided fits the bottom threads perfectly, and the threads are tight, uniform, non-mangled, straight and have never been cross-threaded or stripped.
- The valve stem seat is uniform
- The valve stem with the brass head is .124" in diameter, straight, and fits in its passage very very well
- The spring and piercing assembly are in great shape
- The upper hole is NOT a stripped hole. It is suppose to be a smooth passage for CO2 to flow through breech gasket (130-29)
- Barrel set screw (160-33) shoves the barrel down against the breech gasket. That set screw remains on TOP of the barrel, and does 3 things... keeps the barrel in the breech, keeps the front sight vertical, keeps the breech seal compressed
Please forgive me if I'm missing something here.
Standing by for your reply
Upvote 0