It’s leaking from vent hole bottom of air tank after putting in new Huma reg . Anyone have advice ? Tia !
Streamline leaking after Huma install
- Thread starter Pepper
- Start date
Put factory gauge back in and doesn’t appear to be leaking. Does the fact that my tank is less than 200bar in it at the moment and not enough pressure to seat it ? I even swapped orings. Huma still leaked
Upvote 0
have not done this with my streamline, but i did a reg change with my bsa r10 , and, the instructor stated to be certain to remove an easy to miss o ring that remains when you take out old reg. you may have accidently left an extra o ring from old reg. preventing new reg from seating and sealing properly.
Upvote 0
G
Guest
Guest
Tia, you should tell everyone that Huma mistakenly shipped you a Wildcat reg with a 15 mm plenum spacer ring, when in fact you needed a 7 mm plenum spacer ring to go along with your Huma regulator for your Streamline. That way people will understand that you did not have a problem with your Huma reg, just that you received the wrong length spacer for it. I imagine they have shipped you the correct 7 mm ring by now and you should be receiving it soon. By the way, did you bother trying to make one yourself as I suggested?
Best regards, Chuck
Best regards, Chuck
Upvote 0