Streamline .22 Power Plenum

[Centercut]

Got a Power Plenum from my buddy Derrick @zx10wall this week. Fits Streamline and Wildcat. I shot a 10 shot string average 860 FPS with 18.1 JSB. Took 15 minutes to install the power plenum. Filled back to 220 bar. 10 shot string average 883 FPS. Nothing else was changed. Reg pressure the same, HST the same. So an increase of 23 FPS. Photos below. The PP is the matte black section between breech and pressure tube. Super easy to install. PS. That nice looking stock is courtesy of my shooting buddy Nick @socaloldman who refinished it for me. They don’t look that good from the factory... PPS., you can’t see it in the photo, but the shroud is still an inch longer than the pressure tube.

 

[ohio_hunter]

that pretty sweet increase in fps...how would I get one of those power plenum for streamline?

 

[KeithSJ]

I would like to know as well

 

[sonny]

i believe huma has them too.

silver

 

[Revoman]

Looks good and sounds like it functions even better. I recall taking measurements when I had my Streamline and compared them with my Wildcat Gen I. Identical.

Very interested in getting one for the Wildcat Gen I if you have a source Mike.

Thanks!

mike

 

[Centercut]

Derrick got a couple of these from Ernest Rowe to test out. He sent one to me. I’m not sure if Ernest (or FX) is going to sell them in the future or not. 

 

[Eamon]

I got one as well. Ernest is selling them on Ebay now. Search: "FX Wildcat Power Plenum". He also did a install video.

Eamon 

https://youtu.be/x7L3mPyKva0

 

[Centercut]

Great. The install on the SL is much easier. Remove stock. Degas gun. Unscrew pressure tube. Screw plenum into tube. Screw assembly with plenum and tube on to breech. Fill gun to check for leaks. Install stock. Done. I left reg assembly alone, since the stock FX reg has been working perfectly with 40 string ES under 10 FPS. 

 

[stephfx]

When Ernest posted his videos on the plenum extension for the WC and SL, he mentioned in the comments section that he will sell them on e-bay. It was a week ago.

Would like to have one for my SL too !

 

[earthsculptor]

I have been tempted to do this with my dreamline classic. I was afraid that the added length of the plenum might interfere with the moderator. Nice looking stock by the way. What is the finish? The bipod has also been on my radar. What brand is that?

 

[Revoman]

"I got one as well. Ernest is selling them on Ebay now. Search: "FX Wildcat Power Plenum". He also did a install video."

I copied and pasted the "FX Wildcat Power Plenum" into ebay and got zippo matches darn it!

mike

 

[Centercut]

I can’t find it either. A link would be appreciated. Thanks. 

 

[stephfx]

Comments section of the video he posted on May 9 ("FX WildCat plenum extension"):

So the eBay store "should" be this: https://www.ebay.com/sch/instyle488/m.html?_nkw=&_armrs=1&_ipg=&_from=

Don't see this plenum extension though.

 

[KralGuy]

Here is the item number for it on eBay: 233584261365

 

[stephfx]

 

[Eamon]

Hi guys, sorry I just saw your message at 10;30 pacific time. I had a friend drop in and just got to my computer. I used the search at EBay as well, and nothing came up for me either. Then I remembered we had a shipping conversation via EBay, I found that conversation and now have that EBay link. It brings you to his store, but no pics of WC/SL plenums. However there is a contact link on that page.

[email protected]. 

It's only a start, I hope it helps, and you are able to get yours soon!

Eamon

By the time I got done going my snails speed on the computer from CC's request you guys got it up and as it turns out I could not make it link to the store just email to Ebay.

Sorry!

 

[stephfx]

Just got a response from Ernest (YouTube):

 

[Revoman]

Thanks to all for the amazing digging job!

Guess we wait until more are available "soon".

mike