Kalibrgun Steyr pro x 4,5

[kenakelfa]

Ciao a tutti,scrivo dall'Italia e da tempo sto pensando alla Steyr pro x. Ho HW 100,Kalibrgun cricket ,carabine e Diana stormrider,sempre 4,5 mm e sotto i 7,5 joule. Mi piace sparare senza appoggio e in sequenza e una semiautomatica penso sarebbe molto divertente. In Italia l'unica carabina sotto i 7,5 joule(per energia superiore ci vuole il porto d'armi) è la pro x,ma ,a parte il costo scandaloso, non mi piace il peso delllo scatto,500 grammi.Le mie sono tutte sotto i 300 ,e mi piacciono così. C'è la possibilità di renderlo più leggero? In Steyr dicono che è tecnicamente impossibile. Grazie Mauro

 

[student]

i can't answer your question as i'm new to the sport and know nothing about all of this....that said I thought it might help others if i did a google translate to english:

Hello everyone, I am writing from Italy and I have been thinking about the Steyr Pro X for a while. I have HW 100, Kalibrgun Cricket, carbines and Diana Stormrider, always 4.5 mm and under 7.5 joule. I like shooting without support and in sequence and I think a semi-automatic would be a lot of fun. In Italy the only carbine under 7.5 joule (for higher energy you need a gun license) is the Pro X, but, apart from the outrageous cost, I don't like the weight of the trigger, 500 grams. Mine are all under 300, and I like them that way. Is there a way to make it lighter? Steyr says it is technically impossible. Thanks Mauro

I did find this thread that discusses this topic:

Need help understanding Steyr trigger adjustments

I have a new Steyr Challenge that I am learning about. I decided to adjust the trigger, in particular the second stage. For me it is needs to be light...

airgunwarriors.com

I also did an AI search and it stated the following:



Adjusting the trigger pull on a Steyr Pro X requires understanding its unique design and features
.
1. Trigger Blade Adjustment:

• The trigger blade itself can be adjusted by loosening a countersunk screw.
• This allows movement of the trigger blade left or right and longitudinally, adjusting its position relative to the shooter's finger.

2. External Adjustments (for fine-tuning):

• Once the trigger blade is set, you can use the externally accessible adjustments for further fine-tuning.

Note on Pro Hunters vs Pro X:

• Keep in mind that information regarding trigger adjustments on other Steyr models, like the Pro Hunter, may not apply directly to the Pro X.
• For example, the Pro Hunter has a single adjustment screw that affects both set and standard trigger weights, which might not be the case on the Pro X.

Disclaimer: These instructions are based on online forum posts and general principles of trigger adjustment. Always consult your owner's manual or a qualified gunsmith for specific instructions and safety procedures for your particular Steyr Pro X model.