This just in - an adapter for Steyr’s Lp50 to add a moderator.
Last edited:
Steyr LP50 moderator adapter
- Thread starter cavedweller
- Start date
Have the same one / bough in the same place 
I found lp50 a bit too louder so I was looking for adapter for silencer thar could be mount on steyr lp50 shroud; and I discovered shop in India there was such a adaptor.
However, finally I decided to use different adapter (on the barrel) as I prefer to use lp50 without „shroud” putting carbon on the barrel
I found lp50 a bit too louder so I was looking for adapter for silencer thar could be mount on steyr lp50 shroud; and I discovered shop in India there was such a adaptor.
However, finally I decided to use different adapter (on the barrel) as I prefer to use lp50 without „shroud” putting carbon on the barrel
Upvote 0
I got the same one cavedweller did, but mine came from England. Do you have a link for the one to use without the shroud?
Upvote 0
it has been made on order by my friend
however, I remember I saw somewhere shop where there were a lot of barrel (on) adaptors with many different diameters. Will try to find maybe I have this www on my safari reading list
do you remember lp50 barrel diameter?
Upvote 0
Is the carbonfiber shroud nescesarry, to plug the 3 vent holes on top of the barrel? I have a lp10, which also have the 3 vent holes, I always believed a moderator alone would not help much.
Upvote 0
it was one of the main reason I decided to mount carbon pipe on the barrel. With shroud adapter and silencer these open 3 vent holes make lp50 still too louder. As I use lp50 recreationally I don't see any difference in accuracy. At same time it is much quieter
Upvote 0
I read on Target Talk that a some guys put a piece of thin tape over those holes, they say it helps a lot. I plan on trying it.
Upvote 0
And additional effect - it a bit faster compering with open holes (with the same setup and pellets)
probably a bit more air pushes pellet in the barrel
probably a bit more air pushes pellet in the barrel
Last edited:
Upvote 0