Hello friends,
My current rifle (to be healthy in the autumn I think to take FX Streamline .25
) is Hatsan 125 TH Vortex .22.
Given the "character" of these guns I bought "Mount Sportsmatch Dampa DM60 25.4mm High Dovetail" but it turned out that I could use my "UTG 4X32 1" Hunter Scope, Mil-dot, Airgun Rings, Adj @ 35 SCP - U432FD "should remove the heel that stands at the end of the rim of the rifle so I can stand in the correct position with respect to the optics without pinching the stock on my shoulder ... even in the far back position of the optic and the monoblock I still feel discomfort ... :/
My problem is that now the optics are protected by only four screws of the monoblock because the stopper that comes into the hole of the bus is with a clearance maybe 1 to 2 millimeters :-o because of the poor workmanship of Hatsan :angry:
I have not tried to fire yet how will the situation be, But I doubt there will be a problem ... My question to you is whether Diana Bullseye ZR 25.4mm High Dovetail would be a better option than Dampa in my position?
Thanks in advance! I'm sorry for my bad English!
PP. Links:
https://www.krale-schietsport.nl/en/mount-sportsmatch-dampa-dm60-25-4mm-high-dovetail.html
https://www.krale-schietsport.nl/en/mount-diana-bullseye-zr-25-4mm-high-dovetail.html#all_specifications
Pics:
The position of the optics at the moment and without the heel at the end of the rim bar:
Monoblock Dampa with stopper and heel:
Monoblock and heel but as in the photo the stop of the monoblock does not match the hole in the bus this is without a stop ...:
The shotgun bar looked from above ... even the picture shows how the holes are not symmetrical and well-crafted ... at the "live" and close even worse ... this is the quality of Hatsan for Europe ...:
My current rifle (to be healthy in the autumn I think to take FX Streamline .25
) is Hatsan 125 TH Vortex .22.Given the "character" of these guns I bought "Mount Sportsmatch Dampa DM60 25.4mm High Dovetail" but it turned out that I could use my "UTG 4X32 1" Hunter Scope, Mil-dot, Airgun Rings, Adj @ 35 SCP - U432FD "should remove the heel that stands at the end of the rim of the rifle so I can stand in the correct position with respect to the optics without pinching the stock on my shoulder
... even in the far back position of the optic and the monoblock I still feel discomfort ... :/ My problem is that now the optics are protected by only four screws of the monoblock because the stopper that comes into the hole of the bus is with a clearance maybe 1 to 2 millimeters :-o because of the poor workmanship of Hatsan :angry:
I have not tried to fire yet how will the situation be, But I doubt there will be a problem ... My question to you is whether Diana Bullseye ZR 25.4mm High Dovetail would be a better option than Dampa in my position?
Thanks in advance! I'm sorry for my bad English!
PP. Links:
https://www.krale-schietsport.nl/en/mount-sportsmatch-dampa-dm60-25-4mm-high-dovetail.html
https://www.krale-schietsport.nl/en/mount-diana-bullseye-zr-25-4mm-high-dovetail.html#all_specifications
Pics:
The position of the optics at the moment and without the heel at the end of the rim bar:
Monoblock Dampa with stopper and heel:
Monoblock and heel but as in the photo the stop of the monoblock does not match the hole in the bus this is without a stop ...:
The shotgun bar looked from above ... even the picture shows how the holes are not symmetrical and well-crafted ... at the "live" and close even worse ... this is the quality of Hatsan for Europe ...: