• The buying, selling, trading, or gifting of a standalone airgun moderator is no longer supported in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

No longer allowed Spooky 17 CF and 3d Print Moderator

Classified Status
SOLD
This is a "Spooky" 17 Caliber Carbon Fiber moderator. The internals are gyroid printed PETG.
This moderator performs best at muzzle energies between 15 and 40 foot pounds.

$45.00 to your door.

Specs:
Length: 100mm (~4 in)
Diameter: 24mm (~1 in)
Weight: 1.15 oz (33 grams)
1/2 x 20 UNF stainless helicoil

IMG_20240318_180134412.jpgIMG_20240318_180200035.jpg
IMG_20240318_180146294.jpgIMG_20240318_180154272.jpg



Audio was recorded of the bare rifle and the rifle with the moderator.
Here is that sound sample repeated three times.

The microphone is about ten feet further from the bullet trap than it is from the rifle muzzle. The sound of the pellet striking the trap is much louder than the rifle.

Analysis in "Audacity" shows that the net reduction is 11 decibels. That is a net reduction in detectable range of about 350%.

This chart explains that claim:
Bare rifle is barely audible at (yards)Rifle with moderator is barely audible (same direction under the same conditions)
500 yards~145 yards
400 yards~115 yards
300 yards~85 yards
200 yards~60 yards
 
Last edited:
  • Like
Reactions: RM.510bigbore