American Air Arms Slayer .357 Molds lets talk

[_CTAIRGUNNER_]

I have been using a 36-168J accurate mold to cast my slayer rounds and have found them to be very very accurate 30-100 yards , I have sized these rounds to .358 . I am wondering what other molds have people had good luck with now that I have gotten my casting routine down pat and have an almost endless supply of pure lead ingots at my disposal.

 

[Bladesx]

nice job of casting , targets say they are preforming well for you

 

[_CTAIRGUNNER_]

nice job of casting , targets say they are preforming well for you

My first three shots out of this hunting rifle are 939, 925, 913 with these bullets. It took a few trials to get these down, I found glowing red pure lead was the best.

also, Thank you very much

 

[Airgun-hobbyist]

These NOE molds were designed by a member for airgun use to be bore-riding and less drag. They've been reported to be very accurate out of the Slayer. I have not tried them, as I tend to just get swaged ammo for the Slayer.

359-174-FN-CE2 BT | NOE Bullet Moulds

noebulletmolds.com

 

[_CTAIRGUNNER_]

These NOE molds were designed by a member for airgun use to be bore-riding and less drag. They've been reported to be very accurate out of the Slayer. I have not tried them, as I tend to just get swaged ammo for the Slayer.

359-174-FN-CE2 BT | NOE Bullet Moulds

noebulletmolds.com

I think I may take a dive into that mold, I kind of really like making ammo, its therapuetic in a way.

 

[Airgun-hobbyist]

I think I may take a dive into that mold, I kind of really like making ammo, its therapuetic in a way.

You have a super accurate slug there already. If I am not mistaken, shamu already tested the NOE slug for accuracy in that Slayer. I'd keep perfecting your molding process instead of experimenting.

 

[Bladesx]

if your pills come out frosty looking then the melt is too hot.

 

[CaptKeith]

I see no one has really answered your question, so here is a surprise for you. My best bullet out of my .357 Texan is a full wadcutter. I don’t know if it’s the length or what, but it is accurate and hits hard.

 

[Bowhunter73]

Those are some mighty fine looking bullets good job.