Skout Sniper Slug - Official Release

Hey Mike,
My .25 caliber 34.4 1-23 twist is available now. My next slug barrel will be a .22 caliber 1-15.7 Lothar Walther barrel which should be here in a few weeks.
Hope that helps
~Darryl
Thanks Daryl!
You're always helpful!

the rabbit hole deepens
 
HPR 1800-2000, LPR 170-200, DW 20-27. 820-855fps the few times the chrony actually read different tunes. Can't get the chrono to read enough shots to get any kind of string to establish an ES. Cleaned the barrel before i started slug tuning, haven't found a tune that groups under 2" at 100 yards. I can shoot those kind of groups all day with 22g pellets. Yet I was able to shoot a 5 shot 2.5" group at 170 yards the other day with the sniper slugs, been shooting with no wind. Got 400+ alatros kings on the way and looking at a new chronograph as well.
 
  • Like
Reactions: EDventure
HPR 1800-2000, LPR 170-200, DW 20-27. 820-855fps the few times the chrony actually read different tunes. Can't get the chrono to read enough shots to get any kind of string to establish an ES. Cleaned the barrel before i started slug tuning, haven't found a tune that groups under 2" at 100 yards. I can shoot those kind of groups all day with 22g pellets. Yet I was able to shoot a 5 shot 2.5" group at 170 yards the other day with the sniper slugs, been shooting with no wind. Got 400+ alatros kings on the way and looking at a new chronograph as well.
Start them at 900 FPS or 2300 - 2500 HPS. Set the LP at 150 - 200. Leave the dwell in that range for now. Use it to tighten up the consistency as a last step.

Work up the speed in 10 FPS increments until you start seeing results.
 
Thank you Ed. With my HPR maxed out I can only get 2100-2200psi, with LPR able to reach 200-210. Maxed out I was @ 870fps on a few shots. This should be the most up to date HPR as I got a replacement probably 6 months ago. Its an early Epoch, #87, but the new HPR should be the same across the board. Might switch in my old HPR I rebuilt with the replacement parts, when they sent me the whole new updated one and see what it does.
 
Thank you Ed. With my HPR maxed out I can only get 2100-2200psi, with LPR able to reach 200-210. Maxed out I was @ 870fps on a few shots. This should be the most up to date HPR as I got a replacement probably 6 months ago. Its an early Epoch, #87, but the new HPR should be the same across the board. Might switch in my old HPR I rebuilt with the replacement parts, when they sent me the whole new updated one and see what it does.
Email Tech Support a photo of the current regulator and explain the issue. They'll get you fixed up.