Bsa R10 mk2 owners out there, what is the diameter of the shroud? I searched but could not find it.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Shroud diameter on R10 mk2?
- Thread starter LDD
- Start date
Hi.
Although I do not own a R10, it is 0.995 inches in diameter. Length including adapter/mount at rear + muzzle cap is 24". The internal diameter is about 0.865". It is the same shroud that is on the BSA 1200 SE, and earlier versions of the Scorpion (when it came with the shroud).
Rob
Although I do not own a R10, it is 0.995 inches in diameter. Length including adapter/mount at rear + muzzle cap is 24". The internal diameter is about 0.865". It is the same shroud that is on the BSA 1200 SE, and earlier versions of the Scorpion (when it came with the shroud).
Rob
Upvote 0
Thank you for your reply, it helps a lot. Mine has not come in yet, and I am trying to figure out what size carbon fiber tube I needed to I make a shroud for it. I guessed at 25mm and it sounds like that will work.
Upvote 0
Im in the stages of making a shroud myself ordered the bull barrel connector and a internals upgrade kit from pinkney engineering my carbon fiber tube has a jnternal diameter of 22mm which is a perfect snug fit for the pinkney internals but not for the bull barrel connector so will have a mate turn the connector down to be a snug push on fit will upload a photo when job is done
Upvote 0
Side note the connector was not from pinkney engineering its a factory bsa from john knibbs spares
Upvote 0