Shot count

[Yote]

so Iv been play with the wild cat.Huma reg set at 130 bar hammer spring turned OUT 3/4 .im shooting 18 jbs at an average of 912 FPS I never kept track of the shoot count before doing all this.Problem is I’m only getting 24 real good shots is this average shot count or should I drop it down to the high 850 880 range by the way this is with a 200 bar fill

 

[Stefanjan]

Guess the real question is how is it grouping? Shot count seems a little low but if your putting pellet in pellet (mind you I know very little.about this gun so take what I say with a grain or 2 of salt) i wouldnt mess with it.

 

[hawkeye69]

My bone stock .22 Wildcat with the FX reg. shoots JSB 18.13 grains at 920 FPS and I get a good 60 shots on a 230 bar fill and it's a pellet stacker. 

 

[Yote]

My bone stock .22 Wildcat with the FX reg. shoots JSB 18.13 grains at 920 FPS and I get a good 60 shots on a 230 bar fill and it's a pellet stacker.

Unfortunately my fill hose is regulated and will only fill to 2900 psi .might have to find a unregulated fill hose to fit the bottle 

 

[Kitplanenut]

My stock 22 Wildcat shoots the 18 grain at 920. I refill after 5 magazines, 40 shots. Just habit. Have to check and see if I can gat more. Fill to 230. Most accurate gun I own. sylvan

 

[John "spysir" Blount]

Yote,

Normally the regulator is in the bottle not in the "hose" or fill unit.



John

 

[Yote]

Yote,

Normally the regulator is in the bottle not in the "hose" or fill unit.



John

Yes I know this I should of worded better.

 

[John "spysir" Blount]

I though maybe you did know but new folks come along & just read bit's & pieces.

You should be able to find a post here somewhere on how to change the reg psi by changing out the washer stack in your regulator. Surf up a "Ninja Regulator" video on rebuild/adjusting. Not a hard job but ( thinking of say the small benjimun tank or the one PA sells) if you raise the psi - or make it run wide open- you really have no way to control fill speed/psi as the valve for those tanks is not made to function like that. It's more of an off/on valve than any other fill valve.

Personally still not sold on any of the very tempting low cost compressors but the shoebox was down around $450.00 a while back and is well know. I use an Altros booster. Seems a horrible expense untill you use it the first time. Makes you smile like 2 new airguns! But hten you'd have to adjust your pellet budget. 





John

 

[John "spysir" Blount]

I though maybe you did know but new folks come along & just read bit's & pieces.

You should be able to find a post here somewhere on how to change the reg psi by changing out the washer stack in your regulator. Surf up a "Ninja Regulator" video on rebuild/adjusting. Not a hard job but ( thinking of say the small benjimun tank or the one PA sells) if you raise the psi - or make it run wide open- you really have no way to control fill speed/psi as the valve for those tanks is not made to function like that. It's more of an off/on valve than any other fill valve.

Personally still not sold on any of the very tempting low cost compressors but the shoebox was down around $450.00 a while back and is well know. I use an Altros booster. Seems a horrible expense untill you use it the first time. Makes you smile like 2 new airguns! But hten you'd have to adjust your pellet budget. 





John

 

[Yote]

I though maybe you did know but new folks come along & just read bit's & pieces.

You should be able to find a post here somewhere on how to change the reg psi by changing out the washer stack in your regulator. Surf up a "Ninja Regulator" video on rebuild/adjusting. Not a hard job but ( thinking of say the small benjimun tank or the one PA sells) if you raise the psi - or make it run wide open- you really have no way to control fill speed/psi as the valve for those tanks is not made to function like that. It's more of an off/on valve than any other fill valve.

Personally still not sold on any of the very tempting low cost compressors but the shoebox was down around $450.00 a while back and is well know. I use an Altros booster. Seems a horrible expense untill you use it the first time. Makes you smile like 2 new airguns! But hten you'd have to adjust your pellet budget.

John I have the huma reg set at 130 bar guess I’ll need to drop it down to 120 bar and play with the hammer adjustment.when I bought The WC I also Bought the omega compressor just pumping up the disco was a pain and that was only 2000 psi.Thanks for the web site I’ll check it out?