Shin Sung Career 2 707 .22

[rdpjr6504]

Hello just picked up a Career 2 707 .22 and it leaks. It has a moderator that is indented where the probe is on it that appears pressed on- will not twist off. I have a Career 2 707 .29 and that barrel has no threads for a moderator that is why I think it is pressed on. Does anyone have any idea how to remove it so I can do a reseal ? Any advise would be appreciated.

Thank you

 

[CDavidLong]

If it's a Career II by Zadney, there are 2 screws where the front sight is milled off.

 

[KatoKevin454]

Here's a Website for all the Korean guns

https://fokkemol.weebly.com/korean-airguns.html

 

[John "spysir" Blount]

If it's a Career II by Zadney, there are 2 screws where the front sight is milled off.

A picture would help but if an AZ this is how it is attached.

John

 

[rdpjr6504]

Thank you for your responses. It is an AZ and had the 2 grub screws that I removed and it eventually came off. Now to try to find a factory stub to put back in since I dont think I will put the long moderator back on. Again thank you everyone for your help.

 

[CDavidLong]

AZ modified the barrel and it might be hard to find something to fit. Done back in the day when moderators were questionable made so it will not fit a CF rifle.

I have one in my safe which needs to be resealed If i can get someone to work on it..

 

[rdpjr6504]

Will Piatt the Korean Guru. 

 

[katfisch]

I have a leaking Career 707 mkII …. Anybody have a list of the required orings to try to reseal this beast?