Anyone know who works on Seneca Aspens? I have one that had the pump fail long ago, I disassembled it to just fill off a handpump but would like to see if it’s possible to get a bottle install like I’ve seen done on a few other guns. Thanks for the help!
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Seneca/Sam Yang Seneca Aspen Modding
- Thread starter LayeredOgre
- Start date
I know Duy use to sell convertions for the Aspen/freedom to a bottle gun but I believe he's stopped due to being to busy with work and family.
Upvote 0
Nova Freedom/Seneca Aspen are same just rebadges afaik. That’s a nice looking setup you got!
Upvote 0
Can you tell us how you attached the bottle? I’ve never dug that deep into mine but I think there’s no threads that attach the tiny stock cylinder to the receiver/action. Guessing there’s some diy machining involved.
Upvote 0
Hi bud
The actual pump thread I'm sure is m14
The skinny air tube is held by a pin next to the air gauge.
The skinny air tube I have cut down too 4" as this retains the valve spring in place"
I then had an adapter made from the m14 thread in the block which also holds the plate closed inside the block that the pump usually does.
Then fitted a drop block to the adapter
And blanked off probe hole.
The adapter needs making on a lathe which isn't too hard to do.
The rest can be done with a tap and die set and a few tools.
The gun is much better regulated
I should imagine the doux silencers pump part fits the aspen but not the air tube blanking plug" but not 100%
The actual pump thread I'm sure is m14
The skinny air tube is held by a pin next to the air gauge.
The skinny air tube I have cut down too 4" as this retains the valve spring in place"
I then had an adapter made from the m14 thread in the block which also holds the plate closed inside the block that the pump usually does.
Then fitted a drop block to the adapter
And blanked off probe hole.
The adapter needs making on a lathe which isn't too hard to do.
The rest can be done with a tap and die set and a few tools.
The gun is much better regulated
I should imagine the doux silencers pump part fits the aspen but not the air tube blanking plug" but not 100%
Upvote 0
Hi all
Maybe this fella could help you
If he altered the end of adapter me thinks it's a winner.
Maybe send him a pic or 2 of the pump end
Maybe this fella could help you
If he altered the end of adapter me thinks it's a winner.
Maybe send him a pic or 2 of the pump end
Last edited:
Upvote 0
Do you have pictures of the conversion peice? Or could you take the plastic shroud off and snap some please?
I've been waiting for 3 years for Duy to make me a adaptor, so now I'm gonna ask this guy who makes the avenger adaptors to make one for my Freedom.
Upvote 0
I know Duy made a small plenum that took the place of the original airtube....maybe alienairgunsetc can make one as well!
Upvote 0