WTS or WTT located in the East Bay Area Cali
I like to tinker more than shoot sometimes so here is a finished rifle ready to go. Great first pcp or paper puncher or even pest control. Would like to sell but will entertain trades, seems like I always need one more good scope lol.
Modifications are as follows:
-Shorter Gamo Urban barrel installed for a more compact package. Still free floating although looks like the mod is touching, its not!
-Barrel port has been hand aligned to match the transfer port for better air flow. Most of these are partially blocked from the factory.
-Transfer port has been opened up to port match with the valve output and barrel inlet port for max airflow.
-Long Barrel Band Screw mod has been relocated to the trigger with a little RTV to secure the adjustment. Trigger is pretty good and still safe for hunting etc.
-Air Venturi Aluminum Picatinny Rail installed on the forend of the stock for bipod mounting or a light etc. (Bipod not included)
-Gets an easy 50-55 shots under the wonderful power curve; ~3050psi-1500psi. Extreme spread of ~15psi which is amazing for a non-reg pcp.
-Shoots JSB Hades 15.89g pellets at ~795fps average into little bitty holes. This setup has taken lots and lots and lots of pests, and is very easy to hand pump if you dont want to spend the money on a compressor.
Rifle, Factory Mag, Factory Fill Probe $365 Shipped
SWFA SS 10x42mm Rear Adjustable Paralax (down to 10yds!) UTG Mount, SWFA Rings, and BC Scope Caps all zeroed and ready to roll $215 with rifle package only
I like to tinker more than shoot sometimes so here is a finished rifle ready to go. Great first pcp or paper puncher or even pest control. Would like to sell but will entertain trades, seems like I always need one more good scope lol.
Modifications are as follows:
-Shorter Gamo Urban barrel installed for a more compact package. Still free floating although looks like the mod is touching, its not!
-Barrel port has been hand aligned to match the transfer port for better air flow. Most of these are partially blocked from the factory.
-Transfer port has been opened up to port match with the valve output and barrel inlet port for max airflow.
-Long Barrel Band Screw mod has been relocated to the trigger with a little RTV to secure the adjustment. Trigger is pretty good and still safe for hunting etc.
-Air Venturi Aluminum Picatinny Rail installed on the forend of the stock for bipod mounting or a light etc. (Bipod not included)
-Gets an easy 50-55 shots under the wonderful power curve; ~3050psi-1500psi. Extreme spread of ~15psi which is amazing for a non-reg pcp.
-Shoots JSB Hades 15.89g pellets at ~795fps average into little bitty holes. This setup has taken lots and lots and lots of pests, and is very easy to hand pump if you dont want to spend the money on a compressor.
Rifle, Factory Mag, Factory Fill Probe $365 Shipped
SWFA SS 10x42mm Rear Adjustable Paralax (down to 10yds!) UTG Mount, SWFA Rings, and BC Scope Caps all zeroed and ready to roll $215 with rifle package only
