Sekhmet Digital Gauge Gen 1 insides

[GlennV]

Just in case yall wanted to see what’s inside of the Sekhmet digital gauge. Gen 1 pro. I had one that was dead. Asked a few times in a thread and via emails if the battery was replaceable. Didn’t really get a response except to offer a new gauge at a discount.

So for those wondering. NO you can not replace the battery. It and the rest of the parts are siliconed and or epoxied in.

Using a sharp pointed blade at the edge I was able to get under the face and work my way around. It’s put on with some very solid 2 sided tape and you pretty much destroy the gauge separating it. There is also a very fine circuit at the top that you can’t help but cut when you do it.

 

[imtrigerhapy]

I always like to dissasembe stuff that dont work. Makes me happy im not the only one. Afterall you cant break what dosent work already

 

[PowderBurnt]

I wasn't impressed with their gauge. It leaked air no matter what I put on the threads. Then the plastic cover popped off when I was tightening it.

 

[rdtricks]

I have a Sekhmet gen 1 installed on my Impact MKII. So far no issues and I do appreciate being able to notice the regulator pressure at a glance. I can't say how old this unit is as I am the third owner of this Impact and it was there when the rifle was purchased. I find it interesting to see what makes up the guts of this gauge.