Scotts scba pressure indicator moisture help

[ghengis]

I have a Scotts scba 30 min tank that has moisture behind the built on pressure indicator glass. How do I remove the moisture? TIA

 

[ghengis]

Never mind. All I had to do was to unscrew the two top screws and the lens was accessible to clean. 

 

[rcs9250]

Correct, the black plastic piece is strictly a bumper as fire service uses their scba’s with valve down to protect the valve when they wear them and it allows the hose that goes to mask in a much less tangle vulnerable position.

Randy

 

[Bkrides1]

What connector/hose set up are you using on the Scott’s scba? I have one but once I start filling my gun, the bottle to female connector doesn’t seem to seal and air escapes out of the two holes on the treads of scba bottle.

 

[Bigragu]

What connector/hose set up are you using on the Scott’s scba? I have one but once I start filling my gun, the bottle to female connector doesn’t seem to seal and air escapes out of the two holes on the treads of scba bottle.

CGA347 connection. If air is bleeding out change out the o ring on the probe inside the CGA347 female tread on fitting. 

 

[ghengis]

https://airtanksplus.com/product/one-way-paintball-quick-connect-to-cga-347-scba-adapter-with-bleed-valve/



That's the one i use. No issues so far.