Scott scba tank

[SDellinger]

I have a Scott scba tank with a 5/8 valve hole. I need a 5/8 valve. Anyone know where I might find one? Thanks, Scott

 

[MMCM13]

I would give a call to ExpertHPA (sponsor here) and ask them. I got a tank set up for what I need from them. They seem have the knowledge and parts.

 

[lenweber2]

Here are a couple



https://www.ebay.com/itm/SCOTT-SCBA-Cylinder-Tank-Bottle-Valve-Assembly-4500-PSI-P-N-804722-01-804722/112944259106

https://www.ebay.com/i/372694051407?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=372694051407&targetid=915852593453&device=c&mktype=pla&googleloc=9033505&poi=&campaignid=9343999104&mkgroupid=96003384673&rlsatarget=pla-915852593453&abcId=1139336&merchantid=138375154&gclid=Cj0KCQjw6PD3BRDPARIsAN8pHuGFt6-7NmB-XoN8alXhrhwvuCLm2EkFkfFpYUjjGwqEyaCnN_ejqz8aAsDfEALw_wcB

 

[ctshooter]

Take a look at the Ninja PCP valve: https://www.youtube.com/watch?v=6MkgQehzB6g

Fits paintball and other 5/8 tanks. Dual gauges, bleed built into the knob. It's a decent valve but you have to feather it to get a slow fill.

 

[Longbrownbox]

Hey Scott, give Joe Brancato a call. 

 

[BigTinBoat]

I have a Scott scba tank with a 5/8 valve hole. I need a 5/8 valve. Anyone know where I might find one? Thanks, Scott

The thread is most likely 7/8-14. The diameter of the hole should be about 3/4". Not many (if any) Scott branded tanks with 5/8" thread. (Only 45min tanks I've seen in 5/8 are the Air Venturi)

 

[SDellinger]

Hi, Chuck. Why didn't I think of that?!

 

[Gerry52]

Contact "Fire Etc." in San Diego, CA. 619-525-7286. He's got ALL the Scott SCBA stuff anyone could need.