On my HW95 .22, to measure scope height, I SWAGed that the bottom of the safety bar is close to bore center. Thoughts? Height is used in Chairgun calculations for trajectory and maybe I am being to critical.
N/A Scope height calc?
- Thread starter Deerstalker
- Start date
(OD of the front objective)/2 + gap between objective and tube + distance from the center of the transfer port to the top of the tube
Upvote 0
I put a piece of blue painter's tape across the objective lens, measure it and mark it to center. Then measure down to the center of the bore. Gets me very close.
Upvote 0