Scope adjustment problem

[LDM]

I have an Aeon 6-24X50 on my .22 Cricket and quite like it, but here is the question... The vertical adjustment is close to the center of the adjustment range but the windage adjustment is cranked way to the left, not all the way but more than I like. I have shimmed scopes on other airguns I have owned for elevation adjustment, but have never had to adjust for the scope being over cranked in the windage department. Any solutions???

Thanks,

Don


MOD EDIT: MODIFIED TITLE FOR NEW SECTIONS

 

[30cal]

In the review forum. Here ya go; http://airgunnation.dev/topic/a-review-of-the-25-fx-wildcat/

As for the scope issue, try reversing one of the rings so the clamp is on the other side of the gun. Sometimes that will help.

 

[Kgb1024]

You could try Burris signature zee rings, they have an insert in them to adjust for that, plus they are very strong.

 

[LDM]

I did look at the .25 review... guess there isn't going to be much different from the .22 And I have tried reversing the rings 30cal, but thanks. Might have to try the Burris rings.

Thanks for the responces you guys!

 

[30cal]

Can you try a different scope on the Cricket in the same rings to see if it does the same thing? If so then maybe something on the gun is out of spec. If it is the gun and can't be easily corrected then try the adjustable rings. Maybe someone with a Cricket will chime in with some thoughts. Good luck!

 

[Kgb1024]

I have a Cricket .25 and I have the Burris rings. Mine shot high and left before adjusting with the inserts, now it's maybe 3 clicks off optically centered

 

[jamieinmd]

I like the Sports Match rings, very adjustable.