Does anyone know if the silicone lube made by Spot-On which is for tread-mills is ok for pcps. It saids 100% silicone. Its a lot cheaper then the crosman chamber oil.
safe oil for hpa pcps
- Thread starter press
- Start date
Thanks for the reply T3, Just trying to be sure, Don't want a cylinder blowing up. I don't consider myself a cheap scap....but 11.00 for 1/4 oz.. Come on crosman you can do better then that...
Upvote 0
This is pure silicon oil for 1/3 rd of the price.
Traxxas 1666 Silicone Shock Oil https://www.amazon.com/dp/B0006O5GKY/ref=cm_sw_r_cp_apa_i_TxnaBbJ0PQR6Y
Traxxas 1666 Silicone Shock Oil https://www.amazon.com/dp/B0006O5GKY/ref=cm_sw_r_cp_apa_i_TxnaBbJ0PQR6Y
Upvote 0
Sonny, You would use it ANYWHERE that it would be possible for it to mix with the HPA. But it is a great lube for all moving parts.
Upvote 0
Where a "grease" is in order use divers silicone grease. I use a good bit of it too for o-rings and heavier sliding parts..
Thurmond
Thurmond
Upvote 0
I have been using radio controlled car shock oil. It's 100% silicone and you can get it in different weights. Also you can get get a decent amount for a reasonable price.
Upvote 0