RTI Prophet Performance Compact .22 arrived, a few pics

[Guest]

Loving the fit, finish and looks of this gun already. 

OAL = 25.75" 
Out of the box the reg was set at 150bar and shooting JSB 15.9 at 974 fps.

Shot a few JSB Monster re-designed 25.4gr and they were at 800fps. It was a quick shootout / test and I'll be checking all the numbers again. Seems quite accurate at my 19 yard range,

 

[mikew1000]

Looks good. It’s on my “I need one” list

 

[Guest]

Looks good. It’s on my “I need one” list

The shroud is empty but still quite effective. There is 4.6" of usable volume in front of the muzzle, quite a bit really, and the ID is 21mm maybe slightly under, gotta measure again.

Good Luck

 

[Blackpaw]

Which magazine did you get, the new or old one? I have ordered a PPC from Francisco and I will have him send it in August, once I am back in the USA. Mine is in 22 cal, so it for sure comes with the new magazine design.

 

[Guest]

I ordered a spare and looks like i have both.

 

[Guest]

Which is the newest design?

 

[Blackpaw]

I believe you have the newest design. 

 

[Guest]

The pictured ones are different. Both pictures show them side-by-side, front and back.

 

[harrymoreland]

Looking at your pics, the 500cc bottle would ( just about ) clear the ODB? Mod , interesting,

Please post lots of your findings

Thanks, good luck.

 

[Guest]

Looking at your pics, the 500cc bottle would ( just about ) clear the ODB? Mod , interesting,

Please post lots of your findings

Thanks, good luck.

I can take actual measurements if you'd like.

 

[MikeVV]

Mike -

Put five Daystate Renegade/Pulsar baffles and a short spring inside the Prophet Compact shroud, and drop the external suppressor to get it back to it's as designed shortness. I't as quiet or maybe even quieter than what you have on there now.

Mike

 

[Guest]

Mike -

Put five Daystate Renegade/Pulsar baffles and a short spring inside the Prophet Compact shroud, and drop the external suppressor to get it back to it's as designed shortness. I't as quiet or maybe even quieter than what you have on there now.

Mike

That sounds GREAT but I don't have any of those components

 

[harrymoreland]

MikeHunt, that would be helpful information, thank you.

MikeVV, interesting, but not something one (most folk) would have laying around, got me wondering why you had?.

 

[Cannonball]

That’s a nice looking rifle. I am curious on how fast it will shoot the 25.4 grain if turned all the way up. 

 

[BigTinBoat]

Mike -

Put five Daystate Renegade/Pulsar baffles and a short spring inside the Prophet Compact shroud, and drop the external suppressor to get it back to it's as designed shortness. I't as quiet or maybe even quieter than what you have on there now.

Mike

That sounds GREAT but I don't have any of those components

I had some baffles that I had 3d printed for a Hatsan that I had. Those plus a short section of PCP pipe quiets it down rear nice. Here is what I put into my standard shroud. Hopefully my library will open back up soon and I'll be able to print a set for my .30 cal barrel.

 

[Guest]

That’s a nice looking rifle. I am curious on how fast it will shoot the 25.4 grain if turned all the way up.

I cranked the reg to 160ish and got 875fps with the 25.4 RD. Lots of room left to crank it up but thats not my focus

Just have a handful of the Monster redesigned 25.4 so I am focusing on seeing what other pellets will do / perform. Turned the down to 120 bar and getting 915fps with 15.9 grainers and good accuracy.

 

[Blackpaw]

According to Alex’s video (Air Rifle Activities / @aractivities ) RTI is creating baffles for the Compact’s barrel system.

 

[igolfat8]

Try AA18’s @ 885, 120 bar, HS flush or sticking out just a tad. That’s my happy place for now with mine.

 

[Guest]

Try AA18’s @ 885, 120 bar, HS flush or sticking out just a tad. That’s my happy place for now with mine.

I have a TINY handful of those and tried them but closer to 930fps, too fast for the bull with a higher red setting. Now I am getting a HIGH shot count and accuracy at 120bar with 15.9jsb.

Cant wait the pellet inventory to increase

 

[Guest]

According to Alex’s video (Air Rifle Activities / @aractivities ) RTI is creating baffles for the Compact’s barrel system.

This video is very good and features the RTI Prophet Performance Compact. Which video mentions baffles?



https://youtu.be/kzm6F-55q5U