Are there any vids on how to tear the Royale action down? Would like to take it down and polish the hammer and internals and cant seem to find any instructions on how to do so.
Thanks
Thanks
Royale action?
- Thread starter Rj
- Start date
Go over to Tomcat Airguns and look for the video that he did on the FX Royale … should tell you just about everything you want to know.
Upvote 0
Go to Ernestrowe.com. Don't know for sure if there's any ROYALE vids but that would be the best bet. There is a Royale regulator adjustment video & if there are any "tear down " vids that would be the place. They're just so trouble free hence not too many vids. ABSOLUTELY love my Royale & Boss.
Upvote 0
Thanks @likkitysplyt
My main focus on that video was removing the regulator to fix a leak. I did break it down quite a bit but, I don't think I covered the hammer. There's an allen key slot in on the back of the block You'll unscrew it to change the setting or remove the spring. But, be careful! They have a tendency to strip out easily. If you feel too much pressure, stop! Add some heat to break the loc-tite bond and you should be good to go. Or, just hit it with some heat right away.
Tom
My main focus on that video was removing the regulator to fix a leak. I did break it down quite a bit but, I don't think I covered the hammer. There's an allen key slot in on the back of the block You'll unscrew it to change the setting or remove the spring. But, be careful! They have a tendency to strip out easily. If you feel too much pressure, stop! Add some heat to break the loc-tite bond and you should be good to go. Or, just hit it with some heat right away.
Tom
Upvote 0
https://youtu.be/wMzsJY-i3WA
I have this shows everything except the valve assembly. Hammer is super easy to get at, remove trigger assembly (3 pins) and the 5mm hammer spring holding nut at the back of the action. Then tip it up and it all comes out.
At around 2:15 shows what you need to do, start towards the back and push the pins out. When you get to the last one (towards barrel) its spring loaded so take it out carefully.
Upvote 0