Revelation BB Gun seals

[rasorn]

Hi,

I have an old BB/pellet gun that I am trying to restore back to working condition. It doesn't hold air as it's getting pumped, so I am looking for seals to fix this. The brand it called Revelation and it looks like it's made by crosman. From what I gathered it looks like it was made in 1977. I have found manuals and checked the crosman website but the o-rings they offer are not for this model. I'll try to attach a photo but does anyone have advice of a rebuild kit or replacement seals? Any help would be appreciated

 

[Guest]

Try Baker Airguns: https://www.bakerairguns.com/

Sales: (937) 660-9152

 

[MikeVV]

You can also measure what you have and go into "McMaster Carr" or "Grainger", look up their o-ring list and pull from there.



Mike

 

[AirNGasman]

From your large photo of a small part of the gun, it looks like a Crosman 760 to me. Once you know what Crosman model it its, you can probably find seal kits on Ebay. Much easier than trying to measure several o-rings, then go hunting for them.

 

[Guest]

Couple other places you can check, along with the Ebay idea mentioned above:

Rick @ Precision Pellet
Phone: (717) 382-1481 
Email: [email protected]

Mike Baker:

[email protected]
Phone: 503-706-9512

Both may well have complete kits for rebuilding your rifle, give either a call .

 

[unionrdr]

The Revelation 760 Powermasters were built by Crosman and marketed by Western Auto Stores when I was a kid. I now own two of them. So they are exactly the same as the regular 760's internally. Just find the date code on the barrel band end cap on models built before July 75. and at the beginning of the serial number on the receiver on post-July 75 models. The Western Auto model number means nothing in this instance.

This last one looked to me like 6/74? Anyway, these pics illustrate where to find the date codes at any rate.