reuse suppressors

[sat20387]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

 

[bigHUN]

I have no plinking around a house only visiting my gun club for playing BR and silhouettes.
Earmuffs more important when sitting around CF guns, and tinkering seriously to get a dual protection as well when somebody around me uses a muzzlebreak.
Two guns no can.

 

[coastal drifter]

I have one suppressor on each PCP I own but recently I bought a Donny fatboy which comes with swappable pieces and can be used with caliber's from 177-30cal. works great on my wildcat.

 

[blackdog899]

If by the segmented one you mean Impulse Air. I have the 1350 model on my Raw and it works very well. I had a Donny FL tanto that I tried on it but it was still too loud for my liking. So I put an Impulse air on it with one extra segment and it’s now muffled properly.

If however he meant the segmented buckrail I compared it against my Silent Thunder Accipitor. This was on RAW 1000x
I had the buckrail on and it helped but then put the Accipitor on which was very noticeably quieter.

 

[daddypaddy]

Yes , but another coming. I went cheap at first with 2 buckrails, works depending on gun.
so five guns three mods. Have Silent Thunder Ordnance accipiter now and a Huma coming .
Another gun coming so I’ll always have to move them

buckrail is quality stuff for the price range but if you really want quiet, you have to make it.

 

[Sawney Bean]

For me moderators are like scopes. Occasionally I change them around, but for the most part they're paired to the gun.

 

[Arkansas_Airgunner]

Each 1 of mine has its own dedicated suppressor, however I also have a few extras laying around that I will swap out and play with as well. Not all are the same manufacturer, and have different baffle designs, and different sizes ( length and girth).

 

[Firewalker]

I know nothing on how 3d printers work, how do you get the plans fot the printer to be able to print them

To conform to forum rules, please delete your reply and PM me, we can talk via email.

[email protected]

 

[Bngen3]

I have a tanto that stays on one gun, a sumo that doesn't have a home right now and 2 have the same 3d printed mod on each and just printed 2 more that will go on the Akelas. the printed ones are only 4.5 inches long and 1.6 inches in diameter.

 

[Firewalker]

I've installed the new Silent-Kill mega moderator on my Franken Notos in .25. The first 5 shots were more than impressive!

The steel trap is absolutely LOUD when the pellet hits, only the mechanical sound was heard from the gun.

I'll take it outside tomorrow for some sound measurements.

 

[Grady1969]

great, thank you for the feedback. now does anyone have the .25 Barra 250 Z ? If you do what suppressor do you use or what one would You use to be real quiet because I shoot in my indoor range in my cellar.

I’m running a Buck Rail moderator and it really dampened the noise.
These have a good crack when shot without it.
My neighbor thought I got a new .22 cal. LOL
He never knew about PCP’s , can’t wait to see what he gets.