Hi, I'm new here. I was given a broken Crosman 1088 pistol (automatic style, rifled barrel, 8-shot rotary mag, pellet or BB) and I opened it up and pulled out a broken piece of the frame that was jamming the trigger mechanism. Unfortunately, and stupidly, I neglected to take a photo of it before I tinkered. I have the official parts diagram in sorta break-away 3D but I can't figure out how to reassemble a couple small springs, the sear and a little plastic bit (part #43, Interlock). If anyone has a picture of this pistol with its left side removed but everything internal as it should be, I would be ever grateful. I just wanna finish putting it together in the hope that it will still work!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Request for image of Crosman 1088 pistol internals
- Thread starter Intergalactic
- Start date
well you go to Crosman and go to the bottom of the page and go to manuals and then hit pistols and find what your looking for and you get this
https://support.crosman.com/hc/en-us/articles/203361284-1088-Owner-s-Manual-EVP-2006-
and open the bottom one and hope it helps
so a hope this helps
mike
https://support.crosman.com/hc/en-us/articles/203361284-1088-Owner-s-Manual-EVP-2006-
and open the bottom one and hope it helps
so a hope this helps
mike
Upvote 0
Thank you for the reply marflow, but as i described in my initial post, I already have the Crosman parts diagram and have figured out how to reassemble most of the pistol, but I still need an image, a real-world picture, of the gun with all the parts assembled, so that I can discern how to put the few last pieces together. An ACTUAL PICTURE of the working internals with only the left-side outer half removed
Upvote 0