My Hw44 pistol is shooting louder than normal. I feel I need to replace the barrel o ring at the breech ? I would rather not have to remove the barrel to get to it. Some say use a dental pick to get o ring out . Use a barrel cleaning rod to steady the removal and re installation. This could be tedious work. any suggestion to make it easier ?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
replacing the breech 0-ring , any tips. ?
- Thread starter john4321
- Start date
did you do a tissue test to see if it leaking first
that looks like a small nightmare and the reason I say that is there was a thread on getting the LDC off the other day for cleaning the barrel
but the mounts 2 grub screws seem to be, let say glued on and HW likes there glue and the easy way was to just unscrew the tube off the mount
are there grub screws in the weaver mount holding the barrel ???
with no parts diagram I don't know but I will be watching to see the answer, I have a friend that just got one and loves his
that looks like a small nightmare and the reason I say that is there was a thread on getting the LDC off the other day for cleaning the barrel
but the mounts 2 grub screws seem to be, let say glued on and HW likes there glue and the easy way was to just unscrew the tube off the mount
are there grub screws in the weaver mount holding the barrel ???
with no parts diagram I don't know but I will be watching to see the answer, I have a friend that just got one and loves his
Upvote 0