Remove Edgun Leshiy Grip

[nsw812]

Hi Folks,

For whatever reason, I just couldn't figure out how to remove the grip from an Edgun Leshiy. Any help would be appreciated.

There is a 4mm hex screw on the bottom of the grip which I removed, but I still can't get it off.

 

[Tweeter]

There is another 4mm screw up inside the grip that holds it on the gun. The first screw just holds that end cap on. Remove the plate on the bottom of grip to find the next screw.

 

[nsw812]

Thanks Tweeter. For the life of me, I can't seem to insert the 4mm hex wrench and fit on the inner screw. Are you sure it is 4mm?

 

[Tweeter]

yeah it should be same as the other one. It can be a pain to get the allen wrench in the bolt though, try using a light to make sure you are turning the screw

 

[tsakula]

whne you remove fits one, try removing that cover. then secon one inside the grip. 

 

[EDgun]

Here is playlist of all vids for Leshiy. One can find almost all answeres to all questions. 



https://www.youtube.com/watch?v=d2Hjlu3FlxE&list=PLUtnAk-gnZ44tcVNglmsCyKXap-RJdgfk

 

[nsw812]

Video helped a ton, thank you! I didn't realize that after remove the first screw, I had to move the plastic cover in order to access the 2nd 4mm screw.

 

[EDgun]

Video helped a ton, thank you! I didn't realize that after remove the first screw, I had to move the plastic cover in order to access the 2nd 4mm screw.

subscribe to the channel and you will be aware all all news and tricks regarding EDgun