RAW Rapid Releasing pressure from HM1000x

[Quickoz]

G'day Guys,

Whats the best way to release all the pressure from the bottle on the RAW HM1000X. I want to replace the bottle gauge with a digital one.

 

[Raydee38]

Just unscrew the bottle until you hear the pop and then dryfire once should do the trick. Obviously just make sure the gauge reads zero before you unscrew it. I put a digital on mine also.

 

[MikeAllen]

If it has full pressure the bottle will be difficult to unscrew. Since you are replacing the gauge just unscrew it a bit until you hear it releasing air. Watch the gauge - once it get's down below reg pressure (about 145 BAR) the bottle will be much easier to unscrew.