New guy question. I have a Brocock sniper HP with the huma factory set at 155. Question, when the air pressure is shot down below 155 on the BAR reading is the huma still operational at its optimum.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
regulator setting vs bar pressure
- Thread starter papak
- Start date
I have the same gun. You should see it the huma gauge drop below the set pressure. In fact, my regulator gauge drops more quickly than the tank gauge.
Upvote 0
Most of our airgun air gauges are not all that accurate so when you get close keep an eye on the gauges. Several of mine were off 20-40 bar. As soon as the reg gauge moves, even the smallest amount, add twenty bar to the gun gauge and stop there from now on for the best in accuracy. Me, unless doing some testing where group size really matters, I just shoot until the poi drops a bit before I refill.
Upvote 0
A couple questions. It’s normal to have a 2-3 bar difference on the reg depending on whether the gun is cocked or not? At the end of a shooting session does it matter if you leave the plenum full and uncock or should you always dry fire?
Upvote 0
