Regulator for Hatsan Hercules Bully
- Thread starter Nelson86m
- Start date
I haven't tried the huma, when I got the altaros regulator huma didn't have a regulator with the added plenum. As for the altaros regulator I don't think I would get it again and would like to try the huma. I have had a bunch of problems with air leaks after installing the altaros. Currently I have it off my gun.
Upvote 0
Have you assembled the Altaros in line regulator correctly (parts in the small bag) and used yellow Teflon tape on the gauge and fill nipple threads and the big o-ring between the bottle and the reg and to the gun? Don't use Locktite!
Start at 1:14...
https://youtu.be/KAW_PIrKw10
Start at 1:14...
https://youtu.be/KAW_PIrKw10
Upvote 0
I have, it did seal for about a month or so, I did order all new orings for it and will try the Teflon tape when I go to put it back together.
Upvote 0
Has anybody used a ninja regulator on a Hercules bully? Does anybody know the thread Dimensions of the bottle adapter ? I know the bottle end is M18x1.5 but what are the thread Dimensions of the adapter into the block? Thank you all for your help!
Upvote 0