Daystate Redwolf bottle threads ?

[Airgunmann]

Does any one know the thread size for the bottle the red wolf uses thinking about swapping to a longer one since the room is there and wouldn't add a ton of more weight. 18x1.5 was my guess I haven't tried to remove the bottle yet either so I'm not sure

 

[Centercut]

Yes M18

 

[Airgunmann]

Thanks I figured but didn't want chance it

 

[Healthservices]

Yes different thread pitch than what is on the fx guns but m18


Allen

 

[Airgunmann]

Does the red wolf bottle screw right on or is there a valve in the bottle to adapt the bottle threads to the gun ?

 

[Airgunmann]

I found my answer to my question in a old thread

 

[Healthservices]

Does the red wolf bottle screw right on or is there a valve in the bottle to adapt the bottle threads to the gun ?

Does it screw on? Yes
Is there a valve in the bottle? No,
it's in the adapter that is threaded into the bottle.
The adapter has a different thread than the fx, sorry.
The bare bottle from the fx can thread onto the adapter thats on bottle that the redwolf uses.
Empty the bottle of air before removing the adapter.


Allen

 

[rob_g]

I don’t remember any adapter. When I put the 700cc bottle on I just bled off the pressure by cracking the foster fitting then unscrewed the old bottle and screwed on the new one.

 

[Healthservices]

I don’t remember any adapter. When I put the 700cc bottle on I just bled off the pressure by cracking the foster fitting then unscrewed the old bottle and screwed on the new one.

Bottle valve, you know, you know, the thing!

Allen