RedWolf .22 HP update

[30harry]

So I was wrong on the 970 at power 12....The 970 is the roughly midway point...

I miss interpreted his e-mail....On power 12 I should be close to 1100 FPS give or take and can tune from there....

The board is on the way from Greece so when it arrives will start a thread on the install....Nervous about it but hopefully won't be to big of a pain!

Anyone share how long theirs took to arrive?

He shipped mine on July 3rd 2019 and I was installing it on July 14

 

[Arzrover]

Both mine took around 2 weeks each. I think it's nearing 2 weeks since ordering one for the wife's. Expecting it soon....

No reason to be nervous. Just proceed as if you don't want to break anything. It's actually fairly simple... but you will damage something if careless.

Bob

 

[aussiegav]

A couple of other things to know is you won’t have a magazine counter but you won’t miss it. You can feel there’s no pellet to load as soon as you pull the lever back that’s with the old style magazine.

You will always have a live trigger while the gun is turned on even if you have not loaded it.

And make sure you take the red jumper lead on the right hand side off or the gun will not turn off.

 

[Mikelo123]

Thanks for the advice guys!!

I single load only so the mag counter is no big deal...I am more worried about screwing up wiring etc.

Will be leaning on folks who have done the install quite a bit I am sure!!

Thanks for all the responses guys, VERY much appreciated!