Red Wolfe .22 HP

[wayne74]

What is the diameter and pitch of the threads on the barrel of a Daystate Red Wolfe .22 HP? 

Is the adaptor loctited on or is it just a tight fit?

Thank you.

Wayne

 

[TMH]

If you are talking about the threads on the end of the shroud they are standard 1/2" UNF for moderator attachment.

I have never seen a Red Wolf's thread protector Loctited on.

But I don't know if I am answering your question, or if we're talking about something different.

 

[stoti]

Are you talking about the threads on the shroud or the barrel itself?

Stoti

 

[wayne74]

No, I am talking about the threads on the barrel where the adaptor with the O rings are that the shroud slides over screws onto the barrel.

Thank you.

Wayne

 

[jtnm]

There is no loctite on the airstripper. If it’s alittle tough use a crescent to loosen. The pitch is M14 x 1mm



Thanks 

John T

 

[wayne74]

Thank you. I will give it a try.

Wayne