Red Wolf GCU2 programming tips

[slcrcflyer]

Hi everyone, I was asked a bunch of questions regarding the programming of the GCU2, so I figured that it was easier to make a video. This is an overview of creating the optimal programming settings for the GCU2 board, not a step by step how to as there are decent videos that show how to use the programming pod. I hope this helps someone out.

https://www.youtube.com/watch?v=LEUZXUu1vew

 

[sigp220]

Thanks for the video. Great explanation. I now have a better understanding of what I'm actually going to be doing. I just need to wrap my head around what I'm going to be looking at with each screen on the programmer.

 

[slcrcflyer]

You’re welcome. Operating the programmer is easy, watch the video from AOA it does a great job at explaining how to use it. My video explains how the GCU2 board works and how to make the changes and why. The Red Wolf is an awesome rifle that gives you the ultimate versatility. 

 

[Papamike]

I was hoping to better understand how to reduce the low power to shoot the 18.13 jsb at around 880 FPS currently my new Red wolf shoots 1020 on low power and at 30 yard they all over the place.