Hello everyone,
I am currently breaking in my 2025 Red Panda.
Pellet version Cal. 30
The setup on Karma's website does not work for me, the dispersion circle is relatively large.
(AEA Center Punch 50.5 gr.)
I am now using the following setup:
Regulator 2: 2100 PSI
Hammer spring: 3.5
974 FPS
When I go further back with the hammer spring, the FPS decreases and the dispersion circle increases; when I go higher with the hammer spring, the FPS increases, but so does the dispersion circle.
I don't think the regulator and hammer spring setup is quite right yet.
Does anyone have a good setup or an idea of what I should try next?
Thanks for your help and best regards to all.
Garlado
I am currently breaking in my 2025 Red Panda.
Pellet version Cal. 30
The setup on Karma's website does not work for me, the dispersion circle is relatively large.
(AEA Center Punch 50.5 gr.)
I am now using the following setup:
Regulator 2: 2100 PSI
Hammer spring: 3.5
974 FPS
When I go further back with the hammer spring, the FPS decreases and the dispersion circle increases; when I go higher with the hammer spring, the FPS increases, but so does the dispersion circle.
I don't think the regulator and hammer spring setup is quite right yet.
Does anyone have a good setup or an idea of what I should try next?
Thanks for your help and best regards to all.
Garlado