Real Avid Level Right Pro

mirror mirror on the wall, aligns the scope to the barrel best of all
5 yds to mirror is all that is needed for a 10 yd parallax
plumb bob is for setting a scope/gun combo levels AFTER alignment of scope to barrel,,, if you use a gun/scope mounted level

has anyone gone back to levels and bobs after learning the mirror method of alignment?
cut and paste from google,,,

Align Scope to Barrel​

To align a scope to a rifle barrel using a mirror, follow these steps based on the method described in the context:
  1. Use a large full-body mirror and set it up at a distance of about 5 yards. Adjust the scope to 10 yards (or when it is focused in the mirror).
  2. Look through the scope at your reflection in the mirror. Use a steady gun rest to keep the rifle stable.
  3. Loosen the scope ring screws and rotate the scope until the vertical crosshair intersects the barrel when the crosshairs are centered on the scope objective. This ensures the crosshairs are aligned with the bore.
go to 1:30 mark in the vid
 
Last edited: