Is there a sizing die for 22 pellets? I see all kinds of dings in my pellets and am sure that they effect accuracy.
Re-sizing pellets
- Thread starter WNYBill
- Start date
Like this I guess?
https://www.theshootersbox.com/Pellet-ResizerChecker-22-Cal--Sizer--Stainless-Steel_p_52562.html
Should be some around store bought or some in forums home made to check
https://www.theshootersbox.com/Pellet-ResizerChecker-22-Cal--Sizer--Stainless-Steel_p_52562.html
Should be some around store bought or some in forums home made to check
Upvote 0
If there are dings/dents to the pellet head...i do not believe this or anything will help
Last edited:
Upvote 0
I use this one. It’s tapered so it leaves the skirt a bit larger than the head dia.
www.trrobb.com
So far I’ve been sizing to not touch the head (skirts only) but try various things to see what works best in your barrel
Adjustable pellet Sizer
Adjustable pellet seater, for Break Barrel Airguns, Can be used for all calibre's for greater accuracy and power. If you count the number of turns then you can set it for all the different guns that you have, but they are cheap enough to have one for each gun. Get the most out of your gun. A...
www.trrobb.com So far I’ve been sizing to not touch the head (skirts only) but try various things to see what works best in your barrel
Upvote 0
I am using this same conical bushing, I am resizing the head deep enough to get to a minimum mark from rifling, it will touch the skirt as well.
If you would roll test - the entire tin is the same.
Upvote 0
Sorry if I'm stating the obvious...maybe you need to buy different pellets, or pellets from a different source. I've settled in on FX diabolo pellets - made by JSB - and rarely come across an imperfect pellet.
Upvote 0
I am not sure whom you MikeAllen addressed your comment just above, but my answer would be - I don'y care how the pellet looks like cosmetically holding in my hand but - I want a most consystent POI @ 100 from at least a hundred shots or the entire tin.
Upvote 0