That bullet shoots awesome from my .25 cricket I was not expecting that I purchase some to try on my 18" tj barrel..but the cricket likes them a lot , like 5 shoot in a quarter at a 100y really bad for me because that mold is being discontinued...I will se if some of the mold maker could cut that mold..
RCBS 25-050. 25 ACP
- Thread starter mercado
- Start date
G
Guest
Guest
https://noebulletmolds.com/site/shop/251/tl255-50-rf-cb2/tl255-50-rf-cb2-2-cavity-pb this is bullet I found out to be by far most accurate in old 500cc sumatra that had 1:18tr and sized to .253 so it should be perfect match for that twistrate and if you have not tested I highly recomend to try it. That group I shot with them is still my best 6shot group I ever shot out to 100m with bloody externally regulated sumatra 
Upvote 0
Jiikuu -- Thanks a lot I will buy that one to..
I like variety..I found a mold maker tha has agreed to make me a copy of the rcbs .will let you know how it works...but definitely will order that noe today.... NOE out of stock ☹ .. 2 things you will not believe -- I only turn the hammer spring in I was not expecting to be able to shoot such a heavy bullet 44g is a lot for a stock cricket..maybe the other owner has done something to it .now is mouse fart quiet..n 2 I have almost 35 bullet molds n I haven't not cast one bullet yet...
..purchase 60 pounds of lead in the weekend as soon is here I start my casting learning process....any tips ..?
I like variety..I found a mold maker tha has agreed to make me a copy of the rcbs .will let you know how it works...but definitely will order that noe today.... NOE out of stock ☹ .. 2 things you will not believe -- I only turn the hammer spring in I was not expecting to be able to shoot such a heavy bullet 44g is a lot for a stock cricket..maybe the other owner has done something to it .now is mouse fart quiet..n 2 I have almost 35 bullet molds n I haven't not cast one bullet yet.....purchase 60 pounds of lead in the weekend as soon is here I start my casting learning process....any tips ..?Upvote 0
I 
Casting tips:
Invest in a quality bottom pour lead furnace. Test your lead ( pure lead vs. Alloys). Cast in a well ventilated place.
Happy casting!
-Duke
Invest in a quality bottom pour lead furnace. Test your lead ( pure lead vs. Alloys). Cast in a well ventilated place.
Happy casting!
-Duke
Upvote 0
Thanks 
mapleaf99 .. the seller indicates that the soft led I brought has a BHN of 6 .. good..?
mapleaf99 .. the seller indicates that the soft led I brought has a BHN of 6 .. good..?Upvote 0
Pure lead has a BHN of 5; wheelweights are 9; 10-1 lead-tin alloy is 11.5; linotype is 22.
BHN of 6 should be fine.
-Duke
BHN of 6 should be fine.
-Duke
Upvote 0