RAW reseal question

[ChuckHunter]

Doing a reseal on my .30 cal as she developed a slow leak.

Where does the thick oring on the right go?

Figured out the rest but this one is baffling me

 

[ChuckHunter]

Oh crap nevermind!
I'm such a moron... Lol
It's for the bottle!

 

[ChuckHunter]

After all back together figured out it was the reg leaking through the vent hole!
The kit doesn't come with those two orings so matched them up out of my own stash and so far so good Should be able to get out tomorrow to check consistency over the chrony.

 

[Ranchibi]

Nice! Just received my RAW back from Martin yesterday with a full reseal (kept the bottle @ home and scope), he also changed out the valve seat, springs, biathlon lever installed and tuned to my specs. Had an issue with the sear and he also fixed that. Nice work there as they are simple platforms! If it wasn't for the sear issue I have a full o'ring kit like you and would have done it myself. Been shooting it almost daily since 2018 and figured it needed a Martin massage!

 

[ChuckHunter]

I couldn't believe all crud inside the reg housing! Blew it all out and cleaned everything really well! Really lite film of silicone on everything going back together.
Hoping I did everything right so I don't have to send it to Martin

 

[Ranchibi]

I'm SURE you got it back all resealed properly! One of the reasons I purchased a RAW, simple but smart engineering and this platform has seen years of refinement.